Slide Mounting Media
Electron Microscopy Sciences Technovit Medium 4000 Large Kit
Technovit 400 is a fast curing, cold polymerizing, three-component resin, which is based on a modified polyester, and it is available in the form of powder, syrup I, and syrup II. It is mixed at a ratio of 2:2:1 (powder:syrup I:syrup II). Syrup I and Syrup II are mixed together first and the powder is mixed in last. The color is white opaque.
Technovit 4000 is distinguished by its low shrinkage when polymerizing and its perfect margin fit. Due to its excellent flow characteristics, Technovit 4000 guaranteed that geometrically demanding samples are optimally embedded. Its excellent adhesion properties with regard to metal are a guarantee of gapless embedding of all metal samples. These properties are of particular importance when working with samples that require good edge definitions.
After mixing, Technovit 4000 can be used for casting for approximately 4 minutes and takes approximately 8 minutes to cure.
Electron Microscopy Sciences EMS Silver Colloidal Extender 25 ML
Extender for liquid and paste colloidal silver adhesive used in scanning electron microscopy.
Electron Microscopy Sciences EMS CCC Carbon Adhesive 30 GR
An electrically Carbon Conductive Cement for specimen mounting in all SEM work. After drying of the cement, immediate investigation of conductive specimens is possible. Non-conductive specimens need only to be coated with carbon or metal. Thinner is available if the cement viscosity is too thick.
Electron Microscopy Sciences DEPEX Mounting Media, 500ml
DEPEX Mounting Media is a colorless, neutral, xylene miscible mountant which is suitable for preparations where Canada Balsam is usually used. It comes in the amount of 500ml.
Electron Microscopy Sciences Technovit 8100 Embedding Kit
Technovit Glycol Methacrylate embedding kits developed by Kulzer in Germany are the most convenient to use and offers the best embedding results. Kits give better results offering improved morphology and allows for 1 micron serial sectioning. Polymerization temperature never exceeds 40 degree C, which makes either kit a potential choice for enzyme histochemistry.
The initiator is prepackaged, eliminating messy handling of dry components, and by eliminating aromatic amines from the formation, the components are significantly less toxic. The consistent high quality of raw materials used to make the resin allows for a permanent clear colorless block and, most important, reproducible results
Electron Microscopy Sciences Technovit 3040 Mounting Medium Kit
Technovit 3040 yellow is a fast curing methyl methacrylate-based resin, whose chemical composition warrants a firm, durable bond between Technovit and the specimen.
Technovit 3040 consists of two components–powder and liquid–allowing simple mixing, easy adherance to the specimen, and fast curing. For fixing the mount, a high viscous consistency is required(i.e. a mixing ratio of approximately 2-3 parts per volume powder: 1 part per volume liquid) has proven to be the most advantageous.
Electron Microscopy Sciences LR White resin only; Med. Grade Catalyzed
A very low viscosity (8cps), non-toxic resin, suitable for both Light and Electron Microscopy. LR White is a polar monomer polyhydroxylated acromatic acrylic resin. It can be cured by heat or by UV light. Sections of polymerized LR White resin are hydrophilic. This character allows immuno-cytochemistry reagents to easily penetrate into the sections and etching of the sections is not necessary (etching sections will effect delicate tissue antigens). LR White sections also show minimal non-specific staining. Its low viscosity makes it ideal for infiltrating decalcified bone and teeth as well as plant tissues. It is available in medium and hard grade.
Biocare Medical, LLC EcoMount
EcoMount is a fast-drying, optically clear, permanent mounting medium. This polymer-based mounting medium does not contain hazardous reagents such as xylene, toluene or benzene as its base solvent. EcoMount is designed especially for the permanent preservation of horseradish peroxidase, alkaline phosphatase and Qdot (quantum dot nanocrystals) immunofluorescent techniques. EcoMount permits longterm storage of slides with chromogens such as Warp Red, Vulcan Fast Red and Ferangi Blue. It can also be used with DAB and other non-soluble chromogens. EcoMount dries quickly and retains excellent refractivity. EcoMount is compatible for use on automatic coverslipping machines.
Electron Microscopy Sciences Acrytol Mounting Medium 16 OZ
Acrytol is a rapid-drying mounting medium which enables slides to be screened immediately. It has a low viscosity, allowing the medium to flow easily. It also prevents air bubbles from becoming trapped. Acrytol contains an antioxidant to inhibit stain fading and prevent the formulation of annual rings. A thin coating of Acrytol is all that is needed to adhere a coverglass to a microscope slide.
Electron Microscopy Sciences Citifluor™ Mountant Solution AF3, Glycerol Free, Non Hardening 25 ML
Citifluor mounting medium for immunofluorescence is designed to reduce the fading of the fluorescence of dyes used for labeling biological specimens. In the technique of fluorescence microscopy, the fluorescence is stimulated by high intensity UV and/or visible light. Absorption of the light populates an excited state of the dye (usually a singlet state) and this leads to fluorescence. However, the excited state of the dye may undergo chemical reaction, which leads to destruction as evidenced by the fading of the fluorescence and consequent loss of the image. PBS solution containing an amine-based antifadent.
Material: Glycerol Free
Type: Non Hardening
Electron Microscopy Sciences In-Situ Mount 30 ML
In-Situ mounting medium is a unique mounting medium designed for permanent preservation of tissue sections and cell smear with alkaline phosphatase chromogens like NBT/BCIP and red stain. Use for mounting tissues and cell smears.
Electron Microscopy Sciences Fluoro Gel with Dabco 250 ML
Fluoro Gel with antifading agent 1, 4-Diazobicyclo-(2,2,2-octane (DABCO) is an aqueous mounting medium for preserving fluorescence of tissue and cell smears. This unique formula prevents rapid photobleaching of FITC, Texas Red, AMCA, Alexa fluoro 488, Alexa fluoro 594, Cy dyes, tetramethyly rhodamine, and Redox. The fluorescence is retained during prolonged storage at 4 degree C in the dark. Use for immunofluorescence and confocal microscopy. Storage at 2-8 degree C is recommended
Electron Microscopy Sciences Fluoro Gel with Dabco 20 ML
Fluoro Gel with antifading agent 1, 4-Diazobicyclo-(2,2,2-octane (DABCO) is an aqueous mounting medium for preserving fluorescence of tissue and cell smears. This unique formula prevents rapid photobleaching of FITC, Texas Red, AMCA, Alexa fluoro 488, Alexa fluoro 594, Cy dyes, tetramethyly rhodamine, and Redox. The fluorescence is retained during prolonged storage at 4 degree C in the dark. Use for immunofluorescence and confocal microscopy. Storage at 2-8 degree C is recommended
Electron Microscopy Sciences EMS Shield Mount with Dabco 30 ML
EMS Shield Mount is an aqueous non-permanent, low viscosity mounting medium for immunofluorescence. This unique formula prevents rapid photobleaching of FITC, Texas Red, AMCA, Cy2, Cy3, Cy5, Alexa fluoro 488, Alexa fluoro 594, Green fluorescent protein (GFP), tetramethyly rhodamine and Redox. The fluorescence is retained during storage at 4 degree C in the dark. This medium does not contain phenylenediamine, which destroys immunofluorescence of Cy dyes.
Application: Use for immunofluorescence and confocal microscopy.
Reagent: Ready to use mounting medium for Immunofluorescence.
Electron Microscopy Sciences Dapi Fluoromount G 20ML
DAPI-Fluoromont G is a water-soluble, instant blue nuclear probe fluorescing (455nm) compound for mounting fixed slides using a staining procedure having an aqueous final step. Mounting slides with DAPI Fluoromont G stains the cell nucleus and may reduce fluorochrome quenching during analysis of slides by fluorescence microscopy. this mounting medium also provides a semi permanent seal for long term storage of slide preparations.